ATI super damper installation kit BMW M50 M52 S52 Vanos with trigger wheel

Description

BMW M50/M52/S52 engine ATI super damper installation kit
with trigger wheel
(Vanos trigger position)
If you're building a serious M50/M52/S52 engine, here's a proper solution to replace the old cranky damper wheel! No more broken harmonic balancers, loosen up crankshaft bolt or oil pump issues, a precise crank signal due to undamped solid trigger wheel. ATI dampers are rebuildable and can be tuned with different hardness o-rings.
M52TU, S52US, M54 without trigger wheel:
https://www.ebay.com/itm/254199057264
The kit consists:
CrMo tool steel crankshaft hub to be used with ATI super damper
Lightweight 60-2 trigger wheel made of high tensile Domex steel (for original sensor)
Mounting hardware
ATI DAMPER SHOWN IN THE PICTURES
NOT INCLUDED
A/C pulley not compatible with the kit
Check
/adjust
the ignition timing after installing
The hub is recommended to be used with 6.78" diameter serpentine shell assembly
(ATI #917071, 2JZ)
Other variations can be used too,
-CS
stands for countersunk bolts
(add note to seller if needed)
, number after the part no. 917071
-XX
stands for o-ring hardness, standard is
60.
Longer 6PK1600 belt needed (6rib 1600mm)! Balancing the assembly is highly recommended.
Honing of the center bore might be required, refer to ATI super damper instructions. Use ATI torque rates and locktite on every bolt!
We're using DHL Express shipping, item tracking can be found here:
https://www.dhl.com/en/express.html