Engine Crankshaft Position Sensor 23731-1VA0A for 2006-2010 Toyota Highlander

Description

Item Features
Easy to install and direct replacement.
Stable characteristics, high reliability
A Perfect Aftermarket Replacement
Manufactured with premium materials to withstand the elements and ensure proper function
Sealed connections to prevent environmental corrosion and performance issues
High quality construction for durability
Installation Steps
Engine Crankshaft Position Sensor 23731-1VA0A for 2006-2010 Toyota Highlander
Item Features
Easy to install and direct replacement.
Stable characteristics, high reliability
A Perfect Aftermarket Replacement
Manufactured with premium materials to withstand the elements and ensure proper function
Sealed connections to prevent environmental corrosion and performance issues
High quality construction for durability
Installation Steps
Disconnect the Battery.Remove the disarm plug for the main battery pack on hybrid vehicles as well.
Clear Access to the Sensor.This crank sensor is located behind the starter motor, which must be removed to access the sensor.
Inspect the Sensor Location.Because of the transmission cooling lines, this sensor is difficult to notice, although it is located on the side of the block with the electrical connector attached.
Release the Electrical Connector.A plastic clip will hold an electrical hookup to the sensor, which you must push down or pull outward to disengage.
Remove the Sensor Mount Bolt.The majority of crankshaft sensors only have one mounting bolt, which is usually a 10mm bolt.
Remove the Sensor.To push the sensor mounting tab away, insert a small pick or a regular screwdriver beneath it.
Match the New Crankshaft Sensor.Wipe away any grease from the old sensor so you can notice any design differences in the new sensor.
Installing the New Crank Position Sensor.Clean the position sensor porthole with a shop towel before inserting the new sensor to ensure a proper seal to the new sensor O ring.
Reconnect the Battery.When you're done, take the car off the jack stands and rejoin the negative battery cable, and you're ready to go.
Symptoms of a Failing Crankshaft Position Sensor
Issues Starting the Vehicle.
Intermittent Stalling.
Check Engine Light Comes On.
Uneven Acceleration.
Engine Misfires or Vibrates.
Rough Idle and/or Vibrating Engine.
Reduced Gas Mileage.
Fit for
Lexus
1994-2003 ES300 Base
2004-2006 ES330 Base
1999-2003 RX300 Base
2004-2006 RX330 Base
2006-2008 RX400h Base
Toyota
1995-2004 Avalon (submodel: XL, XLS)
1994 Camry Base
1997-1998 Camry CE
1994-1996,2002-2006 Camry SE
1994-2006 Camry (submodel: LE, XLE)
2006-2007 Highlander Sport
2001-2007 Highlander (submodel: Base, Limited)
2006-2010 Highlander (submodel: Hybrid, Hybrid Limited)
2006 Sienna Limited
1999,2001-2006 Sienna XLE
2004-2005 Sienna XLE Limited
1998-2006 Sienna (submodel: CE, LE)
2006 Solara SE Sport
2007-2008 Solara Sport
1999-2008 Solara (submodel: SE, SLE)
Note
Check and replace sensors regularly to prevent accidents
If you have any questions about the product, please do not hesitate to contact us.
Our products are high quality aftermarket parts that can replace the original parts of your car.
Please understand that the color of the product in the photo may be a little different from the real product due to the lighting problem.
Please refer to the listing pictures for an accurate description of the parts included in the kit
Item Specifics
Brand
T-rank autoparts
Items Included
Crankshaft Sensor
Manufacturer Part Number
T102813K
OE/OEM Part Number
SS10194,PC79,CKP2088,CSS79
Material
Plastic,Metal
Country/Region of Manufacture
Unknown
Performance Part
Yes
Vintage Part
No
Universal Fitment
No
Manufacturer Warranty
1 Year
Finish
Premium Product Quality
system
Sensor System
Interchange Part Number
SS10194,SS10194-11B1,SU4044,WA1444,96063
Superseded Part Number
714994,WE0296000680
Color
Black
Custom Bundle
No
Note
No Instruction Included
Connector Type
Plug In
Terminal Type
Blade
Terminal Gender
Male
Connector Shape
Oblong
Grade Type
Regular
Connector Gender
Female
OE Spec or Performance/Custom
OE Spec
Modified Item
No
Connector Quantity
1
Placement on Vehicle
Front
Vintage Car Part
No
Mileage
More Than 100,000 miles
Payment
Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Shipping
Please note that shipping times on Ebay are estimates. Generally our product arrives faster than the estimated times but on occasion that wont be the case. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. We do not ship product on weekends or holidays
Returns
When returning products to us you must provide: Item Number Buyer ID Your Address Your Phone Number Reason for Return Tracking We only offer refunds if the return is handled within the first 30 days (as per our policy) so any returns after the 30 day period will be via repair or replacement.
Contact Us
Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails.
Positive feedback will be left automatically to customers when your payment is cleared.
Warranty
We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
For malfunction products under warranty period, please contact our customer service via EBay Message.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
alternator
boat cover
boost gauge
car cover
carburetor
catalytic converter
Drive Shaft
engine support
floor mat
fuel line
Other
parking sensor
pressure gauge
rectifier
relay
sensor
starter
stator
steering Rack
transmission filter
Hot Item
5 Ft. x 3/8 Black Small Engine Hose Universal Braided CPE Oil Fuel Gas Line Hose
USD 12.52
Silver Alternator Fit for 2010 2011 Toyota Camry Base Sedan 2.5L L4 104210-2650
USD 120.59
TH400 for Chverolet & GMC Automatic Transmission Filter and Pan Gasket Kit
USD 25.19
For Mercedes-Benz Transmission Conductor Plate & Filter & Gasket & Connector Kit
USD 62.88
For Chevrolet Silverado 1500 Transmission Filter & Gasket & Solenoid A & B Kit
USD 43.99
Excellent Delivery
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
New List Item
3Pcs Complete Power Steering Rack & Pinion Assembly for 2006-2010 Honda Civic
USD 195.39
Steering Rack and Pinion & 2 Outer Tie Rod Ends Rack 25658 for 01-02 Toyota RAV4
USD 210.39
6Pcs Blck PDC Parking Sensors Set Fit for 2016 2017 2018 BMW 230i 66209261587
USD 58.00
6Pcs Black Parking Distance Control Parking Sensors for 2011-2018 Dodge Journey
USD 54.50
Rack 2032 11Pcs Power Steering Rack & Pinion Assembly for 2002-05 Dodge Ram 1500
USD 390.00
Engine Crankshaft Position Sensor 23731-1VA0A for 2006-2010 Toyota Highlander
Item Features
Easy to install and direct replacement.
Stable characteristics, high reliability
A Perfect Aftermarket Replacement
Manufactured with premium materials to withstand the elements and ensure proper function
Sealed connections to prevent environmental corrosion and performance issues
High quality construction for durability
Installation Steps
Disconnect the Battery.Remove the disarm plug for the main battery pack on hybrid vehicles as well.
Clear Access to the Sensor.This crank sensor is located behind the starter motor, which must be removed to access the sensor.
Inspect the Sensor Location.Because of the transmission cooling lines, this sensor is difficult to notice, although it is located on the side of the block with the electrical connector attached.
Release the Electrical Connector.A plastic clip will hold an electrical hookup to the sensor, which you must push down or pull outward to disengage.
Remove the Sensor Mount Bolt.The majority of crankshaft sensors only have one mounting bolt, which is usually a 10mm bolt.
Remove the Sensor.To push the sensor mounting tab away, insert a small pick or a regular screwdriver beneath it.
Match the New Crankshaft Sensor.Wipe away any grease from the old sensor so you can notice any design differences in the new sensor.
Installing the New Crank Position Sensor.Clean the position sensor porthole with a shop towel before inserting the new sensor to ensure a proper seal to the new sensor O ring.
Reconnect the Battery.When you're done, take the car off the jack stands and rejoin the negative battery cable, and you're ready to go.
Symptoms of a Failing Crankshaft Position Sensor
Issues Starting the Vehicle.
Intermittent Stalling.
Check Engine Light Comes On.
Uneven Acceleration.
Engine Misfires or Vibrates.
Rough Idle and/or Vibrating Engine.
Reduced Gas Mileage.
Fit for
Lexus
1994-2003 ES300 Base
2004-2006 ES330 Base
1999-2003 RX300 Base
2004-2006 RX330 Base
2006-2008 RX400h Base
Toyota
1995-2004 Avalon (submodel: XL, XLS)
1994 Camry Base
1997-1998 Camry CE
1994-1996,2002-2006 Camry SE
1994-2006 Camry (submodel: LE, XLE)
2006-2007 Highlander Sport
2001-2007 Highlander (submodel: Base, Limited)
2006-2010 Highlander (submodel: Hybrid, Hybrid Limited)
2006 Sienna Limited
1999,2001-2006 Sienna XLE
2004-2005 Sienna XLE Limited
1998-2006 Sienna (submodel: CE, LE)
2006 Solara SE Sport
2007-2008 Solara Sport
1999-2008 Solara (submodel: SE, SLE)
Note
Check and replace sensors regularly to prevent accidents
If you have any questions about the product, please do not hesitate to contact us.
Our products are high quality aftermarket parts that can replace the original parts of your car.
Please understand that the color of the product in the photo may be a little different from the real product due to the lighting problem.
Please refer to the listing pictures for an accurate description of the parts included in the kit
Item Specifics
Brand :
T-rank autoparts
Items Included :
Crankshaft Sensor
Manufacturer Part Number :
T102813K
OE/OEM Part Number :
SS10194,PC79,CKP2088,CSS79
Material :
Plastic,Metal
Country/Region of Manufacture :
Unknown
Performance Part :
Yes
Vintage Part :
No
Universal Fitment :
No
Manufacturer Warranty :
1 Year
Finish :
Premium Product Quality
system :
Sensor System
Interchange Part Number :
SS10194,SS10194-11B1,SU4044,WA1444,96063
Superseded Part Number :
714994,WE0296000680
Color :
Black
Custom Bundle :
No
Note :
No Instruction Included
Connector Type :
Plug In
Terminal Type :
Blade
Terminal Gender :
Male
Connector Shape :
Oblong
Grade Type :
Regular
Connector Gender :
Female
OE Spec or Performance/Custom :
OE Spec
Modified Item :
No
Connector Quantity :
1
Placement on Vehicle :
Front
Vintage Car Part :
No
Mileage :
More Than 100,000 miles
Payment
Shipping
Returns
Contact Us
Warranty
Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Please note that shipping times on Ebay are estimates. Generally our product arrives faster than the estimated times but on occasion that wont be the case. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. We do not ship product on weekends or holidays
When returning products to us you must provide: Item Number Buyer ID Your Address Your Phone Number Reason for Return Tracking We only offer refunds if the return is handled within the first 30 days (as per our policy) so any returns after the 30 day period will be via repair or replacement.
Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails.
Positive feedback will be left automatically to customers when your payment is cleared.
We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
For malfunction products under warranty period, please contact our customer service via EBay Message.
All rights reserved.