HALTER NAME PLATE LARGE THICK .050" BRASS SCALLOPED OR NOTCHED CUSTOM ENGRAVED

Description

HALTER NAME PLATE, LARGE THICK, .050"
*
,BRASS, SCALLOPED OR NOTCHED, CUSTOM ENGRAVED,
4 1/4" x 3/4"
*
For a thinner solid brass plate,
.032"
, please see listing #
291578007662
TO ORDER:
Please add your preferences in the
Notes to Seller section.
(
NOTE:
ALL
of the following information (1-5) is required when ordering. Any omission will result in a delay of your order.)
(
Charges for a second line and/or any other extras will be billed, via PayPal, in a separate invoice.)
1.
Choose
Notched or Scalloped corners.
(See photo #4.)
2.
Specify which
RIVETS
or CHICAGO SCREWS you want:
NOTE: Fasteners are NOT included except where specifically noted. See below for ordering fasteners of your choice.
If NO FASTENERS required, please state if you need rivet or Chicago screw holes.
1/4" Rivets
(.95 EXTRA
*
)
used for 1-ply (single layer) leather OR 2-ply (double layer) nylon
3/8" Rivets
(.75 EXTRA
*
)
used for 2-ply (double layer) leather OR 3-ply (triple layer) nylon
1/2" Rivets
(.75 EXTRA
*
)
used for 3-ply (triple layer) leather OR 3-ply
+
(triple layer) nylon
1/4" Chicago screws
(.99 EXTRA
*
) used for 2-ply (double layer) leather OR 3-ply (triple layer) nylon
3/8" Chicago screws
(.99 EXTRA
*
)
used for 3-ply (triple layer) leather OR 3-ply + (triple layer) nylon
(When you are NOT ordering fasteners, we still need to know what fasteners the holes should be drilled for.)
*
Unfortunately, when rivets and Chicago screws are ordered, increased USPS rates (
as of 1/27/2019)
apply:
We have to ship as a non-machineable envelope and pass a partial shipping charge on to you.
That's why we have to charge for the rivets. Longer rivets and
Chicago screws must
be shipped as a First Class parcel,
(with tracking number)
(Billed through PayPal via separate invoice).
3.
Specify one or two lines of engraving.
A second line is
.00 extra
(Billed through PayPal via separate invoice)
(The first line is usually a bolder, more prominent font, while an optional second line
is usually slightly smaller.
e.g. 1st line Roman Block
(RB)
, 2nd line Simple Block
(SB)
)
4.
For EACH line,
write text exactly as it is to be engraved
.
Write text
exactly
as it is to be engraved for
EACH
line.
We will engrave in all
HIGH CASE
(all caps) unless otherwise requested, except for
script
and
Olde English
which will be engraved in
Upper & Lower
unless
all HIGH CASE is specifically requested.
Do NOT
use quotes ("), unless they are to be engraved.
Maximum of
25
characters, including spaces, on the first line.
5
.
For EACH line,
Choose a font from our fonts photos:
SIMPLE BLOCK (SB)
SIMPLE BLOCK ITALIC (SBI)
FOUR LINE BLOCK (FB)
FOUR LINE BLOCK ITALIC (FBI)
ROMAN BLOCK (RB)
ROMAN BLOCK ITALIC (RBI)
CLARENDON (C)
CLARENDON ITALIC (CI)
SIMPLE SCRIPT (SC)
SLANT SCRIPT (SS)
CENTURY BLOCK (CB)
OLDE ENGLISH (OE)
NOTES:
Maximum of
25
characters, including spaces, on the first line.
A second optional line is
extra
which will be billed,
via PayPal, in a separate invoice
. (We can usually accommodate a few more letters on the 2nd line.)
Charges for a second line and/or any other extras will be billed,
via PayPal, in a separate invoice.)
IMPORTANT:
Check your eBay messages frequently. If we don't receive a response from you to any questions we may have about your order before the eBay ship-by date, we reserve the right to make our best judgement as to layout, colors fonts, case, and/or size, in order to meet those shipping requirements.
******************************************************************************************************
DESCRIPTION:
A beautiful, thick,
finest quality brushed satin, solid brass, custom engraved name plate,
one line engraved (included). Nickel silver is an option
(
extra
).
M
ount with rivets or Chicago screws
(
See #2 above for pricing
)
.
The dimensions are a 4 1/4" x 3/4" , (with a .050" thickness).
These plates are finished with a baked-on synthetic resin, that will not tarnish or rust. They are sturdy, and create an elegant finish for your halter. We quadruple rotary diamond engrave the name into the brass, to create a very durable engraving, much more so than just diamond etching or laser engraving, that has a tendency to rub off. The exposed raw brass is then double acid oxidized to produce the darkened text.
Perfect for identifying your horse's
lineage, owner, phone number, etc.
with an optional second line
( extra)
.
They can also be used for mounting with rivets to leather belts, bracelets and key chains.
Please double check your order before submitting and include a phone number to reach you,
if we have any questions.
Please ask all questions before purchasing!
If you are ordering more than one, please place your orders separately,
to avoid eBay confusion.
INTERNATIONAL SHIPPING:
We are no longer shipping large rivets or Chicago screws internationally, as this quadruples your shipping charge!!
We are NOT responsible for customs duty, taxes and fees, etc., or any delay that might be incurred from them.
Thank you for your order. We have been in business since 1984, previously as Endless Creations, now as Endless Etc LLC,
(endlessetc.com), with many satisfied and happy customers. We have attended many prestigious horse shows across the
country,
over the years, so whether you're an 'old' customer, or a new client, we welcome you to experience our high
standards of
workmanship and service. We aim to please!
Endless Etc LLC
endlessetc.com
Please see our other eBay listings for bridle tags, brow, saddle and other halter plates, a leather key chain with name plate, stall signs and holders.
Thank you!