Olympus 4/3 E Volt 4 Telescope 1.25" Eyepiece VARIABLE Projection photos Adapter

Description

3/2019  16x13  SSL oly43premium.htm  e
#17+26
You are bidding  on
Premier model
Bayonet style camera adapter to Telescope for Prime Focus and
VARIABLE
Projection Eyepiece Photography as shown in the pictures below. This unit is  used on all cameras listed below
Please note that this is NOT for the
Micro
4/3 system.
This is a list of all 4/3 cameras made.
The E is for "E Volt".  Olympus E-1, Olympus E-300, Olympus E-500,  Olympus E-330, Panasonic Lumix DMC-L1, Leica Digilux 3, Olympus E-400, Olympus E-410, Olympus E-510, Panasonic Lumix DMC-L10, Olympus E-3, Olympus E-420, Olympus E-520, Olympus E-30, Olympus E-620, Olympus E-450, Olympus E-600 , Olympus E-5
If you have any questions please send me a message.
This is the actual piece you are bidding on. The  most left hand side is an Olympus E bayonet mount. The center portion is the  actual VARIABLE Projection Photography Adapter which uses any of your telescope  eyepieces for projection to your cameras CCD.  One can vary the length of  the tube to vary the projected image.  The piece to the right is the  telescope eyepiece adapter.  One just sides this end into the removed  eyepiece on your telescope.  This piece may also be used alone as shown in the pictures  below.  The two screws (center) are holding the upper portion in slotted grooves.  When loosened one can vary the length between eyepiece and camera image sensor allowing you to increase or decrease the magnification known as projection photography.   The  single screw (to the right) is used to hold your telescope eyepiece within this adapter.
These are the actual adapter parts in this sale shown separated.  From left to right (1,2,& 3). The first part (1) is a T2 to camera bayonet specifically for your camera mount. (2) The center piece has a male T-2 thread to attach to part (1).                and a T-2 female thread to attach to part number (3).  Part           (3)slides into a 1.25" diameter telescope eye piece holder and  contains a T-2 thread (M42x 0.75) on its left hand side. This part can be used without the center piece for "Prime focus" photography. See pictures below.
Telescope eyepiece to be placed inside the Variable Projection Adapter (part number 2 above)
Sliding the eyepiece in. The bottom screw will hold the eye piece tight.
Eyepiece in the adapter.
Fully assembled and attached with T2 (Camera not included)
Attached to a telescope.
Side shot of attachment.
The front piece (right side) can be unscrewed and used in conjunction with the T2 included (see diagrams below) for prime focus photography.
Assembly for prime focus using the included  bayonet and front end of piece.
Side view of above picture
A typical Bayonet mount exposed. This is a three lug bayonet.  Camera model may vary for illustration only
Prime focus exploded view to camera.  Camera models may vary in picture
Prime focus on camera. Camera model may vary for illustration only
fixed
To  view my other current auctions now
click
here.
I also sell most T2s for other camera  models which means that I can set up the above kit for any digital DSLR or MILC camera you have.
Standard Bayonet to T2 for SLR  or DSLR cameras
Typical Mirrorless T2 adapter shown  below
I also sell T2 to C mount which screws into all T2-mounts
I also sell Bayonet direct C- Mounts for SLR and DSLR  cameras. Not available for Mirrorless cameras
Please note that a Bayonet mount to T-2 is different for each camera make.   I sell the following types seperately.
Canon EOS EF-S to T2 Mount  Adapter
Canon FD to T2 Mount Adapter
Nikon F to T2 Mount Adapter
Nikon 1 to T2 Mount Adapter
Panasonic to T2 Mount Adapter
Minolta Maxxam to T2 Mount  Adapter
Olympus, Panasonic Lumix,  Micro 4/3 (Four Thirds MFT) to T2 Mount Adapter
Olympus, Panasonic Lumix 4/3  (Four Thirds ) to T2 Mount Adapter
Pentax PK to T2 Mount Adapter
Sony A mount Single lens  Translucent SLT to T2 Mount
Sony α (alpha) NEX 3,5,7 Sony  Handycam NEX-VG10, NEX-VG20, Sony α (alpha) 7 & 9 to T2 Mount Adapter. note: all  use the Sony E Mount
Canon EOS M EF-M to T2
Samsung, NX to T2 Mount  Adapter
Pentax Q to T2 Mount Adapter
Black Magic, Micro 4/3 to T2  Mount Adapter
Fuji X to T2 Mount Adapter
16a
Please note; If you don't see what your looking for ask me.  I add  items all the time but do not update all my advertisements or sales.
These last two pictures are of a T2  female with a C-Mount male
fixed
To  view my other current auctions now
click
here.
Olympus 4/3 E Volt 4 Telescope 1.25" Eyepiece VARIABLE  Projection photos Adapter
15/13
1.25" 1.25 inch variable eyepiece projection photography adapter spotting telescope prime focus with w/ T2
T